Search this blog

Showing posts with label electronic and electrical engineering. Show all posts
Showing posts with label electronic and electrical engineering. Show all posts

Thursday, August 6, 2020

Radio Optimization Technician at JTL (Mombasa)

We are seeking to recruit a qualified 4G Radio Optimization Technician to install and maintain our 4G equipment.

RADIO OPTIMIZATION TECHNICIAN RESPONSIBILITIES:

  • Installation of 4G microwave radios, LTE equipment and other equipment in tower sites;
  • Doing Physical acceptance Tests of newly installed equipment sites;
  • Work with contractors to install/service LTE sites;
  • Strictly enforce HSE regulations in the region of operation for both JTL internal staff and contractors;
  • Replacing radio equipment in rooftops sites and in towers;
  • Power maintenance e.g. DEG, rectifier, battery checks;
  • Doing periodic maintenance of Telecomunications equipment;
  • Periodic maintenance of tower and rooftop infrastructure for rust and earthing quality;
  • Assist team in performing network upgrades when required;
  • Assist team in supervising contractors when required;
  • Perform site visits and site surveys;
  • Perform network drive tests when required;
  • Documentation and generation of reports as and when required.

QUALIFICATIONS FOR THE RADIO OPTIMIZATION TECHNICIAN JOB:

  • Diploma in Electrical and Electronic engineering with at least three (3) years working experience;
  • Experience and Knowledge of 4G microwave radio installation, commissioning and maintenance;
  • Knowledge of LTE/GSM equipment installation, commissioning and maintenance; Certification on this is an added advantage;
  • Possession of a valid fall arrest certification with at least one year to expiry;
  • Training in HSE and DOSH regulations;
  • Be physically and mentally fit.

To apply, visit: https://bit.ly/33xjiVQ

Radio Optimization Technician at JTL (Eldoret)

We are seeking to recruit a qualified 4G Radio Optimization Technician to install and maintain our 4G equipment.

RADIO OPTIMIZATION TECHNICIAN RESPONSIBILITIES:

  • Installation of 4G microwave radios, LTE equipment and other equipment in tower sites;
  • Doing Physical acceptance Tests of newly installed equipment sites;
  • Work with contractors to install/service LTE sites;
  • Strictly enforce HSE regulations in the region of operation for both JTL internal staff and contractors;
  • Replacing radio equipment in rooftops sites and in towers;
  • Power maintenance e.g. DEG, rectifier, battery checks;
  • Doing periodic maintenance of Telecomunications equipment;
  • Periodic maintenance of tower and rooftop infrastructure for rust and earthing quality;
  • Assist team in performing network upgrades when required;
  • Assist team in supervising contractors when required;
  • Perform site visits and site surveys;
  • Perform network drive tests when required;
  • Documentation and generation of reports as and when required.

QUALIFICATIONS FOR THE RADIO OPTIMIZATION TECHNICIAN JOB:

  • Diploma in Electrical and Electronic engineering with at least three (3) years working experience;
  • Experience and Knowledge of 4G microwave radio installation, commissioning and maintenance;
  • Knowledge of LTE/GSM equipment installation, commissioning and maintenance; Certification on this is an added advantage;
  • Possession of a valid fall arrest certification with at least one year to expiry;
  • Training in HSE and DOSH regulations;
  • Be physically and mentally fit.

To apply, visit: https://bit.ly/31AS8Lp

Friday, September 9, 2011

Apprentice Electrical and Instrumentation Technician - Corn Products (K) Ltd, Kenya

Apprentice Electrical and Instrumentation Technician at Corn Products (K) Ltd in Kenya - Jobs and Vacancies

Corn Products (K) Ltd, an affiliate of Corn Products International, Inc producers of quality food ingredients and industrial products derived from the wet milling of corn wishes to recruit for the following position:

Apprentice Electrical and Instrumentation Technician

Main Responsibilities
  • To diagnose Electrical and Instrumentation faults and breakdowns and implement time critical repairs
  • To implement planned preventive maintenance of Electrical and Instrumentation equipment in the plant
  • To monitor electrical parameters in the electrical distribution board and carry out necessary corrective action to address any deviation from the expected values
  • To ensure the weighing equipment are well maintained, calibrated and duly stamped by weights & measures inspector
  • To monitor the stock levels for Electrical and Instrumentation spares and advise the Electrical/ Instrumentation Engineer to initiate the procurement process as required
  • To ensure proper setting and operation of safety shut down systems in the factory
Requirements/ qualifications
  • An Ordinary Diploma in Electrical/ Electronics Engineering or equivalent
  • Good technical skills
  • Experience in handling PLCs and SCADA systems an added advantage
  • A team player
If your background matches the above requirements, please send us your application, including current curriculum vitae, citing your current remuneration package to:

The Human Resource Manager
Corn Products (K) Ltd
Maksons Plaza, Westlands
P.O. Box 11889-00400
Nairobi

Or

P.O. Box 1012 – 30100
Off Kaptagat Road
Eldoret

To be received by us by Friday 16th September, 2011.

Only short-listed candidates will be contacted.

Electrical and Instrumentation Engineer - Corn Products (K) Ltd, Kenya

Electrical and Instrumentation Engineer at Corn Products (K) Ltd in Kenya - Jobs and Vacancies

Corn Products (K) Ltd, an affiliate of Corn Products International, Inc producers of quality food ingredients and industrial products derived from the wet milling of corn wishes to recruit for the following position:

Electrical and Instrumentation Engineer

Main Responsibilities
  • To plan and execute Electrical and Instrumentation projects to improve factory efficiency
  • To diagnose Electrical and Instrumentation faults and breakdowns and overseeing time critical repairs
  • To prepare and implement planned preventive maintenance of Electrical and Instrumentation equipment in the plant
  • To monitor electrical parameters in the electrical distribution board and carry out necessary corrective action to address any deviation from the expected values
  • To direct, instruct and supervise the electrical and Instrumentation team while carrying out assigned duties
  • To initiate procurement of Electrical and Instrumentation spares to maintain minimum stock in factory store
  • To ensure proper setting and operation of safety shut down systems in the factory
  • Developing of control systems for various plant equipment.
  • Ensure the calibration status of all the plant equipment and maintaining of the relevant record.
  • Design and development of the control loops and implementation on various plant equipment
Requirements/ qualifications
  • A Degree in Electrical/ Electronics Engineering or equivalent
  • At least Five (5) years practical experience in a busy manufacturing industry: Three (3) of which must be in handling PLCs and SCADA systems critical.
  • Good practical and technical skills
  • Good management and interpersonal skill
If your background matches the above requirements, please send us your application, including current curriculum vitae, citing your current remuneration package to:

The Human Resource Manager
Corn Products (K) Ltd
Maksons Plaza, Westlands
P.O. Box 11889-00400
Nairobi

Or

P.O. Box 1012 – 30100
Off Kaptagat Road
Eldoret

To be received by us by Friday 16th September, 2011.

Only short-listed candidates will be contacted.

Tuesday, August 30, 2011

Senior Transmission Support & Maintenance Engineer - Safaricom, Nairobi

Senior Transmission Support & Maintenance Engineer at Safaricom in Nairobi - Kenyan Jobs

We are pleased to announce the following vacancy in the Core Network Planning & Support Department within the Technology Division.

In keeping with our current business needs, we are looking for a person who meets the criteria indicated below:

Senior Transmission Support & Maintenance Engineer
Ref: TECHNOLOGY_STSME_August_2011

Reporting to the Senior Manager – Transmission Planning & Support, the job holder will be responsible for Maintenance, Optimization and project management of reliable transmission systems / networks to support interconnection of core elements and major transmission hub sites.

Key Responsibilities
  • Management of Transmission systems/network.
  • Planning and Management of Transmission equipment spares
  • Acceptance of installed transmission equipment from Vendors
  • Ensuring equipment space and power availability for planned systems.
  • Liaison with other department during service provisioning, site surveys and visits to ensure timely provisioning of required transport capacity.
  • Provisioning of required bandwidth/capacity for projects within core network and the regional departments.
  • Ensuring that accuracy and adherence to standards is observed throughout during equipment operations and maintenance.
  • Running of transmission/transport trials, equipment/systems parameters checks and evaluation and subsequent recommendations for approval and adoption of new equipment, systems and technologies into the network.
  • Participate in evaluating use of latest technologies to realize savings on CAPEX and NOPEX and to increase capacities.
Minimum requirements
  • Degree in Electrical and Electronics Engineering or Higher National Diploma in Electronics/Telecommunications
  • 5 years experience with 3 years specialized role in a busy telecommunications environment
  • Involved in installations /commissioning, operation and maintenance of major telecomm projects especially in the transmission field.
  • Excellent communication and motivational skills in line with the management of a multi skilled team
  • Knowledge in Pathloss or any other microwave design tool
  • Computer literate
  • Analytical skills
  • Attention to details
  • Communication and interpersonal skills
  • Trouble shooting and problem solving skills
  • Scheduling of preventive maintenance activities
  • Project tracking and reporting
If you feel that you are up to the challenge and posses the necessary qualification and experience please send your resume and application letter indicating your experience and why you are the most suitable candidate for the role clearly quoting the job title to the address below.

The deadline for application is Monday 5th September, 2011.

The Senior Manager – Talent Acquisition
Safaricom Ltd
Nairobi

Via email to: hr@safaricom.co.ke